022 66393751
Mahadev Dairy Fitting is the most acclaimed manufacturer, exporter, distributor, and supplier of industrial SS Tubing with required test certificates. You can also Order small quantities, we will be happy to quote the best price for small and large quantities & can typically deliver the Stainless Steel Tubing in a minimum time frame anywhere around the globe. Our broad product range makes your individual wishes possible and also meets the extraordinary demands
stainless steel tubing near me,
stainless steel tubing fittings,
SS tubing for sale
Stainless Steel Tubing specification
Tubing Size: 1/8″NB TO 30″NB IN
Tubing Schedule: SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Tubing Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form: Round, Square, Rectangular, Hydraulic Etc.
Length: Single Random, Double Random & Cut Length.
Tubing End: Plain End, Beveled End, Treaded.
| Spec. No. | Title | Scope |
|---|---|---|
| ASTM A 213 TubingASME SA 213 Tubing | Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. | Pressure tubes, made from 16 grades of austenitic stainless steel and from 12 grades of ferritic Cr-Mo Alloy Steel. |
| ASTM A 249 TubingASME SA 249 Tubing | Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. | Pressure tubes, made from austenitic stainless steels, (Types 304, 304H, 304L, 305, 309, 310, 316, 316H, 316L, 317, 321, 321H, 347, 347H, 348, 348H, and XM grades.) |
| ASTM A 268 TubingASME SA 268 Tubing | Seamless and Welded Ferritic Stainless Steel Tubing for General Service. | 15 grades of ferritic SS tubing for general corrosion resistance and high temperature service. (Types 329, 405, 409, 410, 429, 430, 430Ti, 443, 446, XMs & others). |
| ASTM A 269 Tubing | Seamless and Welded Austenitic SS Tubing for General Service. | 13 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. (Types 304, 304L, 316, 316L, 317, 321, 347, 348 and XM grades). |
| ASTM A 270 Tubing | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. | Austenitic stainless steel tubing intended for use in the dairy and food industry in sizes up to and including 4 in. in outside diameter. |
| ASTM A 312 TubingASME SA 312 Tubing | Seamless and Welded Austenitic Stainless Steel Pipe. | Austenitic stainless steel pipe intended for high temperature and general corrosive service. 22 grades are covered. |
| ASTM A 358 TubingASME SA 358 Tubing | Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service. | For corrosion and high-temperature service, normally not less than 8 in. nominal diameter. Types 304, 316, 309, 310, 321, 347, 304L, 316L, 304H, 316H. |
| ASTM A 376 TubingASME SA 376 Tubing | Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service. | Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe. |
| ASTM A 409 TubingASME SA 409 Tubing | Welded Large Outside Diameter Light Wall Austenitic Chromium-Nickel Alloy Steel Pipe for Corrosive or High-Temperature Service. | Nominal diameter 14-30 in. in Schedules 5S and l0S. Types 304, 309, 310, 316, 317, 321, 347, 348, 304L, 316L. |
| ASTM A 450 TubingASME SA 450 Tubing | General requirements for Alloy Steel Tubes. | Common requirements for ASTM tubular specifications. |
| ASTM A 511 Tubing | Seamless Stainless Steel Mechanical Tubing. | 27 grades are covered for mechanical applications. Primarily round tubing. |
| ASTM A 530 TubingASME SA 530 Tubing | General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Pipe. | Common requirements for ASTM pipe specifications as listed. |
| ASTM A 554 Tubing | Welded Stainless Steel Mechanical Tubing. | Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included. |
| ASTM A 632 Tubing | Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter. | 9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. |
| AMS 556 Tubing | Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347) Hydraulic. | Annealed type 321 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn |
| AMS 5557 Tubing | Steel Tubing, Corrosion, and Heat Resistant 18 Cr; 11 Ni; Ti (SAE 30321)Hydraulic | Annealed type 347 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn |
| AMS 5558 Tubing | Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 11 Ni, (Cb + Ta)(SAE 30348) Thin Wall. | High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray. |
| AMS 5559 Tubing | Steel Tubing, Welded, Corrosion, and Heat Resistant 18 Cr, 10 Ni, Ti, (SAE 30321) Thin Wall. | High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray. |
| AMS 5560 Tubing | Steel Tubing, Seamless Corrosion Resistant 19 Cr; 9 Ni (SAE 30304). | Annealed type 304 aircraft hydraulic fine tubing. (Not subject to high pressure). Structural. |
| AMS 5561 Tubing | Steel Tubing, Welded and Drawn Corrosion Resistant 21 Cr; 6 Ni; 9 Mn High-Pressure Hydraulic. | For parts and assemblies such as fluid lines subject to high pressure and requiring corrosion resistance. 1/8 – 1/4 Hard. |
| AMS 5562 Tubing | Steel Tubing, Seamless Corrosion Resistant 21 Cr; 6 Ni; 9 Mn Annealed. | Parts and assemblies requiring both corrosion and heat resistance, and having higher strength than 18-8 types. |
| AMS 5565 Tubing | Steel Tubing, Welded, Corrosion Resistant 19 Cr; 6 Ni (SAE 30304). | Annealed type 304 aircraft hydraulic line tubing. (Not subject to high pressure), Structural. |
| AMS 5566 Tubing | Steel Tubing, Seamless or Welded Corrosion Resistant 19 Cr; 10 N (SAE 30304) High-Pressure Hydraulic | Cold drew type 304, high pressure, aircraft hydraulic line tubing. 1/8 hard.Type 1óSeamlessType 2óWelded & Drawn |
| AMS 5567 Tubing | Steel Tubing, Seamless or Welded Corrosion Resistant 19Cr; 10 Ni (SAE 30304) Hydraulic, Solution Treated. | Fluid lines subject to medium-high pressures requiring corrosion resistance. Annealed.(1) Seamless (2) Welded & Drawn |
| AMS 5570 Tubing | Stainless Steel Tubing, Seamless Corrosion, and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low. |
| AMS 5571 Tubing | SS Tubing, Seamless Corrosion, and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. |
| AMS 5572 Tubing | Steel Tubing, Seamless Corrosion, and Heat Resistant 25 Cr; 20 Ni (SAE 30310). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance. |
| AMS 5573 Tubing | Seamless Type 316 Annealed Structural | Parts & assemblies requiring, both corrosion and heat resistance up to 1600DegF. |
| AMS 5574 Tubing | Seamless Type 309S Annealed Structural | Parts & assemblies requiring both corrosion and heat resistance up to 2000DegF especially welded assemblies. |
| AMS 5575 Tubing | Steel Tubing, Seamless Corrosion, and Heat Resistant 18 Cr; 11 Ni; (Gb + Ta) (SAE 30347). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low. |
| AMS 5576 Tubing | Steel Tubing. Welded, Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. |
| AMS 5577 Tubing | Steel Tubing, Welded, Corrosion, and Heat Resistant 25 Cr; 20 Ni; (SAE 30310). Annealed Structural. | Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication. |
| AMS 5639 Tubing | Seamless Type 304 | Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability |
| AMS 5645 Tubing | Seamless Type 321 | |
| AMS 5546 Tubing | Seamless Type 347 | |
| AMS 5647 Tubing | Seamless Type 304L | |
| AMS 5648 Tubing | Seamless Type 316 | Cold Finished Mechanical Tube Rockwell 90B max Hardness |
| MIL-T-5695 Tubing | Tubing, Steel, Corrosion Resistant, (304) Cold Drawn (1/2 or 1/4 Hard) Smls or W&D. | Intended for use in the fabrication of aircraft structural parts requiring a high degree of resistance to corrosion. |
| MIL-T-6737 Tubing(T 321) | SS Tubing, Steel, Corrosion and Heat Resistant (18-8 Stabilized), Welded.Annealed. | Type 321 and 347 tubing intended for use in the manufactured exhaust-stacks, manifolds, blast tubes, ring collectors, and similar applications where weldable corrosion and heat-resisting steel is required or for use at 8000 – 1500DegF. |
| MIL-T-6845 Tubing(T304) | Tubing, Steel, Corrosion Resistant (304) Aerospace Vehicle Hydraulic System. 1/8 Hard, Seamless, Welded & Drawn. | Intended for use in high-pressure hydraulic and pneumatic systems in which corrosion-resistant materials are required. |
| MIL-T-8504 Tubing(T 304) | Tubing, Steel, Corrosion Resistant (18-8) Annealed, Aircraft Hydraulic System. Seamless, Welded. | Intended for use in high-pressure hydraulic and pneumatic systems in which corrosion-resistant materials are required. |
| MIL-T-8506 Tubing(T 304) | Tubing, Steel, Corrosion Resistant, (304) Annealed, Seamless, Welded. | Intended for use in the fabrication of aircraft parts requiring a high degree of resistance to corrosion. Not to be used in high-pressure hydraulic control systems. |
| MILT 8606 Tubing(T 304L)(T 321)(T 347) | Tubing, Steel, Corrosion Resistant (18-8 Stabilized). Annealed. Seamless, Welded & Drawn. | Intended for use in applications that require a high degree of resistance to corrosion or to temperatures in the range of 800?F-1500DegF. or in applications that involve welding. |
| Mr-T-8808 Tubing(T 321)(T 347) | Tubing, Steel, Corrosion Resistant (l8-8 Stabilized), Aircraft Hydraulic Quality. Annealed, Seamless, Welded & Drawn. | Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication. |
| MIL-T4973 Tubing(T 304L)(T 316L)(T 321)(T 347) | Tubing, Steel, Corrosion Resistant, Aerospace Vehicle Hydraulic System. 1/8Hard. Seamless, Welded & Drawn. | Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication. |
| MIL-P-1144 Tubing(T 304) (T 304L)(T 316) (T 316L)(T 321) (T 347) | Pipe, SS Tubing, (Corrosion Resisting). Seamless or Welded. Annealed. | The pipe is intended for high-temperature and hydraulic brother pressure service under general corrosive conditions. |
We can produce according to Your Required Specification